Dascom 1430 User Guide Manual de usuario descargar pdf (Pagina 47)

Tally Dascom 1430

Vertical Alignment

The vertical alignment function is used to resolve any vertical line misalignments in bi-directional printing.

Adjust Vertical Alignment Procedure:

1. Enter the Service Menu by holding down the【Tear/Off】and【LF/FF】keys while powering up.

2. Load paper.

3. The printer will print as follows:

Service Menu

【LF/FF】= OK 【Tear/Off】= Back 【Load/Eject】= Next 【Online】= Exit

Current Setting：Vertical Alignment

4. Press【LF/FF】key to select the current setting. The printer will print as follows:

Vertical Alignment

【LF/FF】= OK 【Tear/Off】= Back 【Load/Eject】= Next 【Online】= Exit

Please select Paper Type：Single Ply

For single ply paper, press【LF/FF】key to select. For multipart paper, press 【Load/Eject】key to go

to “Multipart”，then press【LF/FF】key to select.

5. If single ply is selected for paper type, the following will print:

Single Ply

Current Print Mode: LQ

Press 【Load/Eject】key to scroll to other print modes if required.

6. If LQ is selected, the following will print:

【LF/FF】= lower ½ to left 【Load/Eject】= lower ½ to right 【Online】= Exit

LQ -2:

||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||

Pressing 【LF/FF】or 【Load/Eject】 key will allow you to adjust the alignment of the vertical lines

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 99 100

Sin comentarios

Dascom 1430 User Guide Manual de usuario Pagina 47