Dascom 7010 Programmers Manual ZPL Manual de usuario descargar pdf (Pagina 15)

Accepted Values:

N = continuous media

Y = non-continuous media

W = non-continuous media web sensing

M = non-continuous media mark sensing

Comments:

If the parameter is missing or invalid, the command will be ignored.

^MT

Media Type

Description:

The ^MT command selects the type of media being used in the printer. There are two choices for this

command;

1.Thermal Transfer Media-This media uses a high carbon black or colored ribbon. The ink

on the ribbon is bonded to the media.

2.Direct Thermal Media-The media is heat sensitive and requires no ribbon.

Format: ^MTa

Parameters:

a = media type used

Accepted Values:

T = thermal transfer media

D = direct thermal media

Comments:

If the parameter is missing or invalid, the command will be ignored.

^MU

Set Units of Measurement

Description:

This command sets the printer units of measurement. The ^MU command works on a field-by-field

basis. Once the mode units is set, it carries over from field to field until a new mode units is entered.

Format: ^MUa,b,c

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 75 76

Sin comentarios

Dascom 7010 Programmers Manual ZPL Manual de usuario Pagina 15