Dascom DP-520 Manual del operador

DP-520 Wired Operator’s Manual Dascom Part Number 5206790 Rev A

WALL MOUNTING INSTRUCTIONS A bracket suitable for attaching the printer to a wall is available The bracket snaps into the bottom of the printer. P

Getting Started You may find that you can connect the printer to your Personal Computer (PC), and everything works perfectly the first time. However

Various applications and Tool Kits which fully support the DP-520 are available for PDA’s and other Pocket PC platforms from www.fieldsoftware.com. W

Table Of Contents Introduction ...

INTRODUCTION This document is an Operator’s Manual, written for the person connecting and using the Dascom DP-520 Wired thermal printer. Please read

MODES OF OPERATION The printer has two operating modes when not actually printing:  "Idle Mode": ready to accept data, but no data are in

PAPER Pressing the paper feed button when the printer is idle advances paper at typically two inches per second. However, the paper feed button has

STATUS INDICATIONS The Status Indicator at the front of the printer has a number of color combinations, which repeat in up to a 4-phase pattern to pr

PRINTER OPERATION AND PROGRAMMING The DP-520 utilizes a Fujitsu FTP-628MCL103 printer mechanism, with a fixed (parallel) print head with 384 horizont

INTERFACE DETAILS RS-232 SERIAL INTERFACE The DP-520 has an industry standard RS-232 interface. The default parameters are 9600 baud, 8 data bits,

ALTERNATIVE POWER SUPPLY ARRANGEMENTS The DP-520 Wired printer is designed to be operated from a 9V to 36V voltage source that is capable of supplyin